Node 1, the first element of the International Space Station to be manufactured in the United States and the first to be launched on the Space Shuttle, is unloaded in its container from an Air Force C-5 jet cargo transport at KSCs Shuttle Landing Facility runway on June 23 after its arrival from NASAs Marshall Space Flight Center (MSFC). The module was then transported to the Space Station Processing Facility. The Node 1 module is currently scheduled to lift off aboard the Space Shuttle Endeavour in July 1998 along with Pressurized Mating Adapters (PMAs) 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at MSFC. Once in space, the Node 1 will function as a connecting passageway to the living and working areas of the International Space Station. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other Space Station elements. (Photo Release Date: 06/23/97 )
KSC-97EC-0922 - Raw ASCII Text Caption file
KSC-97EC-0922 - Low (GIF Format, 320x240 pixels x 256 colors, approx 50 Kbytes)
KSC-97EC-0922 - Medium (JPEG format, 1024x768 pixels x 256 colors, approx 250 Kbytes)
KSC-97EC-0922 - High (JPEG, 2040x2640 pixels x 16 million colors, approx 400 Kbytes)
STS-88 KSC Photo IndexNext Image KSC-97EC-0923
DISCLAIMER: No copyright protection is asserted for these photographs.
If a recognizable person appears in this photograph, use for commercial purposes may infringe a right of privacy or publicity. It may not be used to state or imply the endorsement by NASA of a commercial product. The "EC" in the KSC-97EC-0922 photo identification number means that these photographs are available for preview and download in electronic digital form ONLY. They may not be ordered from NASA in photograph form.